Down Timer (#Down.t, Down Timer) - Ko Propo EX-1UR Operation Manual

Press the enter key.
5
Press the up key.
6
The first lap time is displayed.
Press the + key or the – key to switch the lap
7
time to be displayed.
The lap time is stored for up to 99 laps. If the number
of laps exceeds 99, the lap time is sequentially
overwritten from the first lap time.
Press the back (function) key.
8
Press and hold down the – (stop) key or the
9
button that has been assigned in step 4 on
page 42 to reset the time.

Down timer (#DOWN.T, Down timer)

When the specified time elapses, an alarm is
sounded. This function is useful for measuring the
refueling timing for an engine car.
1) Press the down key or the up key to display
1
"#DOWN.T."
To start countdown immediately:
Press the + (start) key or the button that has been
assigned in step 2 to start measurement.
Press the – (stop) key or the button that has been
assigned in step 2 to stop measurement.
When the measurement stops, pressing again the
+ (start) key or the button that has been assigned
in step 2 will resume the measurement.
Pressing and holding down the – (stop) key or the
button that has been assigned in step 2 will restore
the time that has been set in step 3.
2) Press the enter key.
1) Press the + key or the – key to select the
2
button for starting/stopping countdown
timer.
Select OFF, ET1 to ET5 or BT1.
2) Press the up key.
– (stop) key – (stop) key
+ (start) key + (start) key