Table of Contents
Advertisement
When pressing the up key, do not touch
the steering wheel.
If undue force is applied when moving the
steering wheel to the right and left, the
correct position may not be set.
1) Move the throttle trigger to check the ac-
4
tual measurement value displayed on the
screen and release the throttle trigger at
the neutral position.
2) Press the enter key.
The value on the screen is an example.
It is not the actual display.
When pressing the up key, do not touch
the throttle trigger.
Gently move the throttle trigger to the front and
5
rear fully to set the upper limit value.
The value on the screen is an example.
It is not the actual display.
If undue force is applied when moving the
throttle trigger to the front and rear, the
correct position may not be set.
Press the enter key.
6
Press the back (function) key to return to the
7
normal screen.
The setting contents are stored.
When pressing the back (function) key,
do not touch the steering wheel or the
throttle trigger.
If the problem is not solved with this operation,
request repair to our service department.
Adjusting the LCD contrast (#CONTRST, Contrast)
The contrast of LCD varies depending on the am-
bient temperature because of its characteristics.
Use this function menu to adjust the contrast for
adequate display.
Press the down key or the up key to display
1
"#CONTRST."
Press the + key or the – key to change the
2
contrast.
The contrast can be set in eight steps. More number
of * causes the screen to be darker.
If you press the + key and the – key simul-
taneously, the contrast is set to the maximum.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.
Contrast value
Advertisement
Table of Contents
