Display During Connect Copy; If Connect Copy Is Canceled - Ricoh Pro C550EX Operating Instructions And Troubleshooting

2. Troubleshooting When Using the Copy/Document Server Function
Problem
You get different copy results
from the main and sub-
machine.
2

Display during Connect Copy

This section describes the display during Connect Copy.
Problem
[Connect Copy] is not
displayed.
[Connect Copy] is not
displayed.
[Connect Copy] is not
displayed.
[Connect Copy] is not
displayed.
[Connect Copy] is not
displayed.
[Connect Copy] is not
displayed.
[Connect Copy] appears
faded.

If Connect Copy Is Canceled

This section describes causes and remedies when Connect Copy is canceled.
38
Cause
The Copy Quality setting
differs on the two machines.
Cause
The sub-machine's main
power is off.
Functions that cannot be used
with Connect Copy are
selected on the main machine
(such as storing or copying
the first page of a document
in the Document Server).
The main machine is in
Interrupt mode.
The [Connect Copy Key
Display] setting is off.
The cable connecting the two
machines is damaged.
The is lit.
Functions that cannot be used
with Connect Copy have
been set.
Solution
On the control panel, select [Edit /
Color]. In [Color], under [Adjust Color],
select [Copy Quality], and then make
the same setting on both machines.
Solution
Turn on the sub-machine's main power.
Cancel the functions selected on the
main machine.
Press the [Interrupt] key on the sub-
machine to cancel Interrupt mode.
Select [Display] for the [Connect Copy
Key Display] setting.
Contact your service representative.
Follow the instructions displayed.
Press the [Clear Modes] key to clear the
settings.