Ricoh Pro C550EX Operating Instructions And Troubleshooting page 57

5. While pinching the sides of the end fence, slide it a little to release the lock.
6. Slide the end fence into position according to the paper size you want to load.
7. Repeat steps 5 and 6 until the end fence is aligned with the paper size you want to load.
8. Square the paper and load it print side down.
Re-lock the side fence again.
9. Carefully slide the paper tray fully in.
10. Check the size on the display.
BAZ008S
BAZ073S
BAZ009S
Changing the Paper Size
55
3