Ricoh Pro C550EX Operating Instructions And Troubleshooting page 16

1. When the Machine Does Not Operate As Wanted
1
5. Press [Start Printing] and a test pattern will be printed.
6. Place the test pattern on the exposure glass and press [Start Scanning].
The image will be corrected after "Scanning...Please wait." disappears.
• The test pattern will not be read if it is set in the ADF.
• The test pattern will be printed on an A4 , 8
B4 JIS (Japanese Industrial Standard)
tray.
• Set the test pattern in the following way:
• Make sure to set the test pattern on the exposure glass, and then 2 or 3 white sheets, same size as
the test pattern, above the test pattern.
14
1
/ × 11 size page. If A4 is not available, A3
2
will be used. Make sure to check the paper set in the paper
BAZ030S
or