If You Cannot Exit From Connect Copy - Ricoh Pro C550EX Operating Instructions And Troubleshooting

Problem
The machine cancels
Connect Copy.
The machine cancels
Connect Copy.
The machine cancels
Connect Copy.
An error message indicates
the main machine has broken
down.

If You Cannot Exit from Connect Copy

This section describes causes and remedies if you cannot exit from Connect Copy.
Problem
There is no response when
you press [Connect Copy].
There is no response when
you press [Connect Copy].
Cause
The main machine's main
power is off, or the operation
switch has been pressed.
The sub-machine's main
power is off.
The Weekly Timer setting is
coming into effect on the main
machine.
The is lit.
Cause
Scanning is in progress.
Copying is in progress.
When You Cannot Make Copies As Wanted
Solution
Turn on the sub-machine's main power
or operation switch, and then press
[Connect Copy].
A message instructing you to check the
sub-machine appears on the display of
the main machine. Press [Cancel] to
clear Connect Copy. Turn on the sub-
machine's main power, press Connect
Copy and then make your settings
again.
Turn on the main machine's operation
switch, and then press [Connect Copy].
For details about Weekly Timer:
Monday - Sunday, see "System
Settings", General Settings Guide.
Copying is not possible. Follow the
instructions displayed.
Solution
Press the [Clear/Stop] key on the main
machine, and then press [Stop].
Press the [Clear/Stop] key on the main
machine, and then press [Stop].
2
39