Display Count: Uncapped Time Length; Display Count: Need For Ink Circulation Sequence; Display: Print Head Temperature During The Last Air-Purge/Ink Re-Filling; Display: Print Head Humidity During The Last Air-Purge/Ink Re-Filling - Ricoh BRG-P1 Field Service Manual

2. Appendix: SP Mode Tables

Display Count: Uncapped Time Length

7-006-001

Display Count: Need for Ink Circulation Sequence

7-007-001

Display: Print Head Temperature during the Last Air-Purge/Ink Re-filling

7-008-001
7-008-002

Display: Print Head Humidity during the Last Air-Purge/Ink Re-filling

7-009-001
7-009-002

Display: Temperature during the Last Maintenance

7-010-001
72
ENV:ACL DECAPTIM
Use this SP to display the total time length when the maintenance unit's cap is
released from the print head.
JDG:LIQUID MNT
Use this SP to display if it is necessary to perform ink circulation sequence.
0bit for Print Head 1
1bit for Print Head 2
1: Ink circulation sequence needed
0: Ink circulation sequence not needed
TEMP:DIFF POS:H1
TEMP:DIFF POS:H2
Use this SP to display the print head temperature during the last time air-purge/ink
tank re-filling was performed.
HUMI:DIFF POS:H1
HUMI:DIFF POS:H2
Use this SP to display the print head humidity during the last time air-purge/ink tank
re-filling was performed.
HTEMP:FIN MNT:H1
Print Head 1 (C / K)
Print Head 2 (Y / M)
Print Head 1 (C / K)
Print Head 2 (Y / M)
Print Head 1 (C / K)