Ricoh Pro C550EX Operating Instructions And Troubleshooting page 36

2. Troubleshooting When Using the Copy/Document Server Function
Problem
Images are skewed.
2
Images are skewed.
Edit
Problem
In "Double Copies" mode,
parts of the original image
are not copied.
In "Erase Border", "Erase
Center", or "Erase Center /
Border" mode, parts of the
original image are not
copied.
In "Erase Border", "Erase
Center", or "Erase Center /
Border" mode, parts of the
original image are not
copied.
In "Margin Adjustment"
mode, parts of the original
image are not copied.
In "Image Repeat" mode, the
original image is not copied
repeatedly.
34
Cause
The side fences in the paper
feed tray are not set properly.
The paper is feeding in at a
slant.
Cause
Combination of original and
copy paper is not correct.
You set a wide erased
margin.
Originals are not scanned
correctly.
• You set a wide erased
margin.
• There is a lack of margin
space on the opposite
side of the binding
position.
You selected copy paper the
same size as the originals, or
you did not select the proper
reproduction ratio.
Solution
Make sure the side fences are set
properly. For details about how to set the
side fences, see p.53 "Changing the
Paper Size".
Load the paper correctly. See p.43
"Loading Paper".
Solution
Specify the paper size again. For
example, select A3 for A4 originals.
See "Double Copies", Copy/
Document Server Reference.
Make the margin width narrower. You
can adjust it between 2 - 99 mm (0.1 -
3.9 inches).
Place the originals correctly.
Set a narrower margin with User Tools.
You can set the width between 0 - 30
mm (0 - 1.2 inches).
Select copy paper larger than the
originals or select the proper
reproduction ratio.