3. Adding Paper, Toner and Staples
7.
Pull up on the end fence to secure it at the required position.
3
8.
Square the paper and load it print side down.
Re-lock the side fence again.
9.
Carefully slide the paper tray fully in.
10.
Check the size on the display.
Changing the Paper Size in the Wide Large Capacity Tray
This section describes how to change the paper size in the Wide LCT.
• Check that the paper edges are aligned with the left side.
• Do not stack paper over the limit mark.
• When loading tab stock, set the tab sheet fence in the Wide LCT.
58
BAZ074S
BAZ009S