Ricoh Pro C550EX Operating Instructions And Troubleshooting page 37

Stamp
Problem
The stamp position is wrong.
The stamp is not printed on the
back side of sheets when
duplex copying.
Combine
Problem
Copies made with the
"Booklet" or "Magazine"
function cannot be folded into
a book correctly.
When using "Combine",
parts of the image are not
copied.
Copies are not in correct
order.
Duplex
Problem
Cannot print in duplex mode. You have loaded paper on
Cause
The paper orientation is
wrong.
The back side stamp position
is incorrect for the paper size.
Cause
You selected a setting
("Open to Left" or "Open to
Right") that does not match
the orientation of originals.
You specified a reproduction
ratio that does not match the
sizes of your originals and
copy paper.
You placed the originals in
the incorrect order.
Cause
the bypass tray.
When You Cannot Make Copies As Wanted
Solution
Check the paper orientation and stamp
position.
Reset the back side stamp position. For
details about Duplex Back Page
Stamping Position, see "Copier/
Document Server Features", General
Settings Guide.
Solution
In [Copier / Document Server Features],
under [Edit], set [Orientation: Booklet,
Magazine] properly.
When you specify a reproduction ratio
using Manual Paper Select mode, make
sure the ratio matches your originals and
the copy paper. Select the correct
reproduction ratio before using
Combine mode. See "One-Sided
Combine", "Two-Sided Combine", or
"Auto Reduce/Enlarge", Copy/
Document Server Reference.
When placing a stack of originals in the
ADF, the last page should be on the
bottom.
If you place an original on the exposure
glass, start with the first page to be
copied.
Solution
Remove paper loaded on the bypass
tray. Load paper in a tray other than
bypass tray.
2
35