2.
Load paper orderly. Tightly fit the side fences to the loaded paper.
When loading paper larger than A4, draw out the paper extender.
• To set the paper in the twin interposer, align the orientation of originals in the ADF as shown below.
Orientation-Fixed Paper or Two-Sided Paper
This section describes loading paper that has a specified orientation and printing side (such as letterhead
paper).
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or
copied paper) might not print correctly, depending on how the originals and paper are placed. Set
[Letterhead Setting] to [Yes] in [Input / Output] under [Copier / Document Server Features], and then place
the original and paper as shown below. For details about Letterhead Setting, see "Copier/Document
Server Features", General Settings Guide.
BTD401S
BAZ025S
Loading Paper
3
51