Display During Connect Copy - Ricoh Aficio MP 5500 Operating Instructions Manual

Troubleshooting When Using the Copy Function

Display During Connect Copy

This section explains about the display during Connect Copy.
Problem
[Connect Copy] is not dis-
played.
2
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] is not dis-
played.
[Connect Copy] appears
faded.
24
Cause
The sub-machine's main
power is off.
Functions that cannot be
used with Connect Copy
are selected on the main
machine (such as storing
or copying the first page
of a document in the Doc-
ument Server).
The main machine is in
Interrupt mode.
The [Connect Copy Key Dis-
play] setting is off.
The cable connecting the
two machines is dam-
aged.
The L is lit.
Functions that cannot be
used with Connect Copy
have been set.
Solution
Turn on the sub-machine's main power.
Cancel the functions selected on the
main machine.
Press the {Interrupt} key on the sub-ma-
chine to cancel Interrupt mode.
Select [Display] for the [Connect Copy Key
Display] setting.
Contact your service representative.
Follow the instructions displayed.
Press the {Clear Modes} key to clear the
settings.