4.
Press [OK].
Auto color registration takes about fifteen to thirty seconds. When it is completed, the display returns
to the color registration menu.
5.
When you have made all the settings, press the [User Tools / Counter] key.
The initial display is shown.
Auto Color Calibration
If a certain color is strong or the color of the copy differs from the original, adjust the yellow, magenta,
cyan and black balance.
If " Add Toner" is shown on the display panel, the test pattern cannot be printed.
1.
Press the [User Tools / Counter] key.
2.
Press [Maintenance].
3.
Press [Auto Color Calibration].
4.
Press [Start].
When performing the auto color calibration from the copy function, press [Start] under Copier
Function.
BTD011S
Maintenance
1
13