Ricoh Pro C550EX Operating Instructions And Troubleshooting page 25

*1 Simultaneous operations are only possible after the preceding job documents are all scanned and [New Job]
appears.
*2 You can scan a document after the preceding job documents are all scanned.
*3 Simultaneous operation becomes possible after you press [New Job].
*4 During stapling, printing automatically starts after the current job.
*5 Stapling is not available.
• Stapling cannot be used at the same time for multiple functions.
• If the machine is capable of executing multiple functions simultaneously, specify which function should
have priority in "Print Priority". This setting is factory-preset to "Display Mode". For details about Print
Priority, see "System Settings", General Settings Guide.
When a Job Is Not Performed
BTD013S
1
23