Mx10003 Front And Rear Panel Components - Juniper MX10003 Hardware Manual

Figure 3: Rear View of the DC-Powered MX10003 Router
1 Power supply modules (DC)
—
Figure 4 on page 27 shows the electrostatic discharge (ESD) point on the router.
CAUTION:
point, and place the other end of the strap around your bare wrist. Failure to use an
ESD strap could result in damage to the hardware components.
Figure 4: ESD Point on the MX10003 Router
1 ESD point
—

MX10003 Front and Rear Panel Components

The front panel on the front of the router enables you to view status and troubleshooting information at
a glance. The front panel contains LEDs for the router components, online/offline and reset buttons,
auxiliary and console ports, clocking ports, and ports for the 10-Gigabit Ethernet MIC.
Before removing or installing components, attach an ESD strap to an ESD
2 Fan modules
—
27