Mx10003 Port And Interface Numbering - Juniper MX10003 Hardware Manual

Table 18: MX10003 MPC (Multi-Rate) Port Speed
MIC Port Number
PIC 0 0-5
PIC 1 0-11
SEE ALSO
MPC and MIC Lane LED Scheme Overview
Configuring Rate Selectability on MX10003 MPC to Enable Different Port Speeds
MX10003 MPC Rate-Selectability Overview
Interface Naming Conventions for MX10003 MPC
Understanding Rate Selectability
MX Series MPC Overview
MPCs Supported by MX Series Routers
Replacing an MX10003 MIC | 141

MX10003 Port and Interface Numbering

In the physical part of the interface name, a hyphen (-) separates the media type from the MPC number
(represented as an FPC in the CLI), and a slash (/) separates the logical PIC and port numbers:
type-fpc/pic/port
type—Media type, which identifies the network device. For example:
xe—10-Gigabit Ethernet interface
et—100-Gigabit Ethernet interfaces (40 and 100-Gigabit Ethernet interface)
For a complete list of media types, see Interface Naming Overview in the MX Series 5G Universal Routing
Platform Interface Module Reference guide.
fpc—Slot in which the MPC is installed, and are represented in the CLI as either FPC 0 or FPC 1.
Port Speed Supported
40 Gigabit Ethernet
4X10-Gigabit Ethernet
100 Gigabit Ethernet
40 Gigabit Ethernet
4X10-Gigabit Ethernet
55