Nfx150-C-S1 Front Panel And Rear Panel; Mount An Nfx150-C-S1 Device On A Wall - Juniper NFX150-C-S1 Quick Start Manual

NFX150-C-S1 Network Services Platform Quick Start

NFX150-C-S1 Front Panel and Rear Panel

Figure 1: Front Panel Components of NFX150-C-S1
1 2 3
8 7
1— Mini-USB console port
2— RJ-45 console port
3— One 10/100/ 1000BASE-T RJ-45 management port
4— Four 10/100/ 1000BASE-T RJ-45 LAN ports
Figure 2: Rear Panel Components of NFX150-C-S1
1 2
7 6
8
1— Grounding point
2— Lock
3— Serial number
4— Fans

Mount an NFX150-C-S1 Device on a Wall

NOTE: You can mount an NFX150-C-S1 device on a desk or other level surface by using the four rubber feet that are
shipped with the device. The rubber feet stabilize the chassis.
NOTE: The wall mounting kits are not shipped with the device and must be ordered separately.
To mount an NFX150-C-S1 device on a wall, you require the parts that are shipped with the device along with the following
additional parts and equipment. These are not shipped with the device.
2
4
6
3
5
5
5— System status LEDs
6— Two 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ WAN ports
7— USB 3.0 port
8— Reset button
4
5— CLEI code
6— Power supply input
7— Cable tie holder
8— Electrostatic discharge (ESD) point
Copyright © 2018, Juniper Networks, Inc.