Displaying Network Node Information; Procedure - Tyco 4100ES Operator's Manual

Displaying Network Node Information

Overview

Procedure

Networked systems consist of multiple panels linked via a 4120 network. Each panel has a
programmer-defined node number, used to identify the panel on the network. The following
section describes how to determine a panel's node number. The node number is required
when selecting a network point. See "Selecting Points" in Chapter 4 for more information on
doing this.
Press the MENU key to display the Main Menu. Scroll the highlight to "Panel info: Stat
1.
and Revisions?", and press <Select Item> soft key or <ENTER>.
In the Panel Menu, scroll the highlight to "Network Status and info", and press <Select
2.
Item> soft key or <ENTER>.
9-7