Logging In and Out of the System, Continued
Log In Procedure
(continued)
Log Out Procedure
5.
If the passcode entered in Step 4 is correct, the following message is shown:
Failure to log out may allow unauthorized personnel access to the various protected functions.
If no keypad activity is detected for ten minutes, the system automatically returns to Level 1
access.
1.
Press the <MENU> key. Highlight the Access option and press <ENTER> or <SELECT
ITEM>.
2.
Highlight the Logout option and press <ENTER> or <Select Item> key. The following
message is displayed:
Note: Logging in at access level 4 creates a fault that requires a Warm Restart of the
system to clear (see Chapter 9). This ensures that the system is returned to its normal
operating mode following service.
7-3