Viewing Fault or Isolate Conditions
Overview
You can view the list of acknowledged Fault or Isolate conditions at any time:
1.
Press the <FAULT ACK> or <ISOLATE ACK> key to display the Fault or Isolate list.
The first Fault or Isolate condition in the list appears at the top of the display.
Figure 3-3. Isolate List after Acknowledgement
2.
You can use the <NEXT> or <PREVIOUS> keys to scroll the highlight through the list,
or <PAGE DN> or <PAGE UP> keys to take larger steps.
3.
While viewing the list, pressing the <More Info> soft key will display more information
about the highlighted device that has the fault or the isolate condition.
After 60 seconds, the system will revert to displaying the first and last Fault conditions, or first
and last Isolate condition if there no faults.
3-4