Table of Contents
Advertisement
Logging In and Out of the System
Introduction
Log In Procedure
The 4100ES uses four access levels, referred to by the numbers 1 through 4, to control what
operators can do with the system. The system typically operates at access level 1, which allows
an operator to accomplish basic tasks without logging in to the system.
Other functions, for example certain control functions, may be passcode protected to prevent
access by unauthorized personnel.
Follow these steps to log in to the system at access level 2, 3, or 4:
1.
Obtain the passcode for the access level at which you want to operate.
2.
Press the <MENU> key. Highlight the Access option, and press <ENTER> or <Select
Item>.
3.
Select Login option, and press <ENTER> or <Select Item>.
4.
Enter the passcode for the access level. The passcode can be up to 10 digits in length.
Press the <ENTER> key on the numeric keypad when you have finished entering the code.
*
A
is displayed for each digit of your passcode, as shown here:
7-2
Continued on next page
Advertisement
Table of Contents
