Error Handling; Quit Errors - Baumuller b maXX 5000 Series Instruction Handbook Manual

9.3

Error handling

NOTE!
The device is provided with predefined error reactions. You are able to set the error
reaction of the device in „Depending on settings" in the column „Reaction" marked er-
ror messages. An exception here are errors, which have to have an immediate pulse
inhibit as a consequence. This error reaction can not be changed due to safety rea-
sons.
9.3.1

Quit errors

If the red error LEDs H14 or H24 light up, at least one error exists.
Error acknowledgments cause all error messages to be reset. Individual acknowledgment
of errors is not possible. An acknowledgment causes deletion of the errors, if deletion was
possible on account of the error circumstances.
There are 4 methods of acknowledging an error:
m Via ProDrive:
Figure 23:
m Via writing access to control word
m Via a digital input
m Via the pulse enable input:
Additional data according the subject resetting of error messages is available in the „Pa-
rameter manual b maXX 5000".
Troubleshooting and fault correction
Button "Quit errors" (either in the dialogue box "Device manager" or on the page "De-
vice manager".
That means, that you inform the device, that you have noted the error, that you have
removed it or that you want to pass over it. Due to error reset all error messages are
reset. An individual error reset is not possible. The button Quit errors causes a resetting
of the error, in case the cause for the error message exists no longer.
ProDrive Drive manager
Precondition is, that the drive is only controlled via the hardware inputs (that means
that the motor guide is neither set via the operating software nor via another commu-
nication source). Furthermore the option "Quit error via pulse enable" must be active.
With the first rising edge of pulse enable the errors then are reset. But the drive still
does not start. Therefore you then need a second rising edge for the enable.
Instruction handbook b maXX 5000 add-on module MOD
Document No.: 5.19015.01
9
83
of 90