Commissioning/Operation; Safety Notes - Baumuller b maXX 5000 Series Instruction Handbook Manual

The commissioning ensures that the b maXX 5000 add-on module MOD was correctly
detected and that it operates. For further information on commissioning and parameter-
ization see parameter handbook b maXX 5000.
The following conditions must be complied with before commissioning:
1 Wiring of the Modbus/TCP (MOD) is done properly (MOD as shown in example in
2
3 The b maXX 5000 is ready for use.
6.1

Safety notes

In general
WARNING!
Risk of injury due to improper operation!
Improper operation can lead to severe personal injury or material damage.
Therefore:
m Perform all operational steps according to the details of these instruction hand-
m Before beginning any work, ensure that all coverings and protective devices are
m The control cabinet in which the device is installed should be protected against
C
6
ZFigure 5– on page 27).
The switching cabinet is closed properly and all the safety devices have also been put
into operation.
book.
installed and are functioning properly.
contact with electrically live parts.
Keep all doors of the control cabinet closed during operation.
Instruction handbook b maXX 5000 add-on module MOD
OMMISSIONING
Document No.: 5.19015.01
/O
PERATION
31
of 90