5.4.3
Pin assignment IEE
Pin assignment of the Sub-D connectors (male) at the front of the Ethernet/IP slave EIP:
Pin assignment
14
1
25
13
Sub-D connector
25-pole, male
5.4.4
Connecting cable IEE channels
The connection cable has to be manufactured by the user:
1 use following materials:
2 connect
Pin No.
1
2
3
4
5
15
16
17
9
10
11
12
13
23
24
25
m cable: LiYCY LiYCY 3 x (2 x 0,14 mm²) + 2 x 0,34 mm² Cu-braiding.
m Sub-D connector: 25-pole, female (IEE side)
m e.g. Sub-D connector: 26-pole, male (b maXX 5000 side)
m cables from the incremental encoder emulation to the further control units must pro-
vide paired cables per track! (track -0/0, -A/A, -B/B)
m the cable shield with the housing of the Sub-D male / Sub-D female connector
m the 25-pole female connector (IEE side) with the cable
m e.g. the 26-pole Sub-D male connector (b maXX 5000 side, pin assignment see In-
struction handbook b maXX 5000) with the other end of the cable.
Instruction handbook b maXX 5000 add-on module MOD
Meaning
Channel 1 Ground incremental encoder emulation
Channel 1 External power supply +5 V IEE
Channel 1 Incremental encoder emulation track 0
Channel 1 Incremental encoder emulation track -0
Channel 1 Incremental encoder emulation track B
Channel 1 Incremental encoder emulation track -A
Channel 1 Incremental encoder emulation track A
Channel 1 Incremental encoder emulation track -B
Channel 2 Ground incremental encoder emulation
Channel 2 External power supply +5 V IEE
Channel 2 Incremental encoder emulation track 0
Channel 2 Incremental encoder emulation track -0
Channel 2 Incremental encoder emulation track B
Channel 2 Incremental encoder emulation track -A
Channel 2 Incremental encoder emulation track A
Channel 2 Incremental encoder emulation track -B
Document No.: 5.19015.01
5
Installation
29
of 90