7
All values and selections must be made according following
dow. The settings correspond with the signal of a square wave incremental encoder
with 1024 increments.
Mode (172.1)
Figure 15:
Encoder emulation 1 - settings
This corresponds with the following settings of the parameter list.
Parameter
Mode (172.1)
No. of increments (172.3)
Zero pulse offset (172.4)
NOTE
If the set value for the IEE is not generated by an encoder, as described in example
above, the „Source" (regarding 7) in window encoder emulation must be set to „Po-
sition set value" or „Fieldbus set value".
Instruction handbook b maXX 5000 add-on module MOD
Commissioning/Operation
Value
0x0000 0001 (1
)
dec
1024
dec
0x0000 0000 (0
)
dec
Document No.: 5.19015.01
6
ZFigure 15–
in this win-
37
of 90