Demands On The Power Supply; Demands On The Connection Cables - Baumuller b maXX 5000 Series Instruction Handbook Manual

5.2

Demands on the power supply

5.2 Demands on the power supply
In order to comply with the standard EN 60 204-1 (electrical equipment of machines), the
cable specified therein must be used. The connecting plugs must not drop - otherwise
there is a danger of short circuits, external voltage, etc.
NOTICE!
The danger is: electrical voltage.
1
2
NOTE!
Pay attention to EMC compatible cabling, see instruction handbook b maXX 5000 or
b maXX 5500, 5600, 5700, chapter
5.3

Demands on the connection cables

Completely assembled cables are not available, assembly of a connection cable see
ZConnecting cable IEE channels–
26
Instruction handbook b maXX 5000 add-on module MOD
Document No.: 5.19015.01
of 90
Ensure that the electrical power connection parameters as specified in the Tech-
nical Data are adhered to and that the connections are made in accordance with
the stipulated data.
Avoid short circuit between input and output points.
Installation requirements with regard to
from page 29.
EMC.
Baumüller Nürnberg GmbH