Commissioning Procedure Iee; Recognition Of The Incremental Encoder Emulation Iee; Prodrive Navigation - Baumuller b maXX 5000 Series Instruction Handbook Manual

6.2

Commissioning procedure IEE

6.2 Commissioning procedure IEE
The commissioning is divided into the following tasks:

1 Recognition of the incremental encoder emulation IEE

2 Configuring the incremental encoder emulation IEE
3 Testing the function
6.2.1 Recognition of the incremental encoder emulation IEE
While starting the device, the controller reads out the identifier of the incremental encoder
emulation(s) automatically.
After that, check with ProDrive whether the incremental encoder emulation IEE has
been identified as correct:
1 Switch on b maXX 5000
2 Wait till the system has booted.
3 Open the window „Startpage" in ProDrive.
Figure 7:
32
Instruction handbook b maXX 5000 add-on module MOD
Document No.: 5.19015.01
of 90

.ProDrive Navigation

Baumüller Nürnberg GmbH