Drive Management, Reset Errors; Prodrive, Activate Encoder Emulation - Baumuller b maXX 5000 Series Instruction Handbook Manual

4 Select sub-menu „Axis 1/management"
and reset any faults/error messages eventually existing in the b maXX 5000.
These errors possibly were caused by faulty mounting (e.g. defect cables) or faulty in-
stallation (e.g. missing voltage supply). After the errors were removed commissioning
can be continued.
no error
Figure 8:

Drive management, reset errors

5 Activate encoder emulation in Configuration/Encoder emulation
Choose „Encoder emulation 1" or „Encoder emulation 2"
Figure 9:

ProDrive, activate encoder emulation

Instruction handbook b maXX 5000 add-on module MOD
Commissioning/Operation
Document No.: 5.19015.01
6
33
of 90