4. Remove the retaining screw (see Number 1).
5. Loosen the rear bracket retaining screws (see Number 2).
6. Slide the rear bracket away from the add-in card and carefully remove it from the cassette.
3.16.3
Installing the PCIe* Add-in Card
Install the add-in card into the cassette by completing the following steps:
Figure 59. Installing the add-in card into the PCIe* cassette assembly
1. Carefully insert the add-in card into the adapter cassette.
2. Loosen bracket screws for about 1/4 turn to adjust the adapter bracket to secure the add-in card
according to length; then tighten bracket screws (see Number 2).
3. Fasten the screw to secure the add-in card to the cassette (see Number 1).
66
Intel® Server System R2600SR Setup and Service Guide