System Installation Into A Rack; Table 2. Switch Functions And Definitions - Intel R2600SR Series Setup And Service Manual

Important: If a clear protective sticker covers the switch blocks, remove and discard it to allow access to the
switches. Any system board switch or jumper block not shown in this document's illustrations is not used
with this system.
The table describes the switch functions on the server board.
Switch Switch
Block Number
2 BMC boot backup
S18
BMC force update
3
4 TPM physical presence
1 System UEFI backup
2 Password override jumper
S19
3 CMOS clear jumper
2.2

System Installation into a Rack

A focus of setting up the server system is to install the system into a rack. Before doing this, however, install
the rack kit.
The illustrations in this subsection display all items needed to install the system into a rack. These items are
included with the system.
Note: If any items are missing or damaged, contact Intel Customer Support.
The slide box of the rack kit includes these parts:
 1x - Right slide
 1x - Left slide
 2x - M5 screws
 2x – Washers
Intel® Server System R2600SR Setup and Service Guide

Table 2. Switch functions and definitions

Switch Name
Normal operation (default)
Normal operation (default)
Normal operation (default)
Normal operation (default)
Normal operation (default)
Normal operation (default)
Usage Description
Open
The compute node will boot by
using a backup of the BMC
firmware.
Enables BMC force update
Indicates a physical presence to the
system TPM
Enables system BIOS backup
Overrides the power-on
password
Clears the real-time clock (RTC)
registry
Closed
13