Figure 38. Kvm Cable Routing - Intel R2600SR Series Setup And Service Manual

3.9.2.1 Attaching the KVM Cable
Once the KVM module has been replaced, attach the KVM Breakout cable to attach the KVM module cable to
the KVM module, follow these steps:
Connect cables to connectors as shown in Figure 38.
1.
a. Long signal cable (see Number 1) to the connector (see Number 3).
b. Short signal cable (see Number 6) to the connector (see Number 4).
2. Route both cables through the respective internal cable management baskets (see Numbers 2 and 5).
Intel® Server System R2600SR Setup and Service Guide

Figure 38. KVM cable routing

41