Discharging The Accuflow™ System - Raven AccuFlow Vortex Installation And Operation Manual

DISCHARGING THE ACCUFLOW™ SYSTEM
Anhydrous ammonia (NH
maintenance on the AccuFlow system or any toolbar/implement used to apply NH
NOTE: Refer to the following procedure for additional details about system components, locations and
assistance with discharging the AccuFlow system.
The following procedure outlines the proper method for discharging NH
preparing the system for transport, service, or maintenance
1. Toggle the control console or vehicle master switch to the off position.
Important Information: Discharging the AccuFlow™ system
) must be completely discharged prior to transporting, servicing, or performing
3
Exposure to anhydrous ammonia can cause
severe burning, blindness, or death. Use extreme
caution when opening a previously pressurized
system. To avoid injury or death, always wear
proper personal protective equipment.
DO NOT transport anhydrous ammonia
application equipment while it is charged with
anhydrous ammonia. The AccuFlow Vortex cooler
and product lines must be completely discharged
before transporting the implement.
Always wear appropriate personal protective
equipment (PPE) as recommended by the
chemical and/or equipment manufacturer when
installing, servicing, and operating the NH3
system. Appropriate PPE includes, but is not
limited to:
• Liquid proof gauntlet-style gloves impervious
to NH3.
• Long sleeved shirt and long pants or
protective suit.
• Indirect vent chemical splash goggles or
indirect vent chemical splash goggles with
full-face shield.
IMPORTANT INFORMATION
.
3
DANGER
DANGER
DANGER
from the AccuFlow system and
3
7