Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Raven Manuals
  4. Farm Equipment
  5. AccuBoom
  6. Installation manual

Raven AccuBoom Installation Manual

For case ih spx 3320/3330/4420 sprayer and 20 series flx (liquid bed)
Hide thumbs Also See for AccuBoom:

Advertisement

Quick Links

Download this manual
CASE IH SPX 3320/3330/
4420 Sprayer and 20 Series
FLX (Liquid Bed) AccuBoom
Installation Manual
P/N 0160-0171-084 Rev D
01/17
E28992
Copyright 2017

Advertisement

loading
Need help?

Need help?

Do you have a question about the AccuBoom and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Raven AccuBoom

Summary of Contents for Raven AccuBoom

  • Page 1 CASE IH SPX 3320/3330/ 4420 Sprayer and 20 Series FLX (Liquid Bed) AccuBoom Installation Manual P/N 0160-0171-084 Rev D 01/17 E28992 Copyright 2017...
  • Page 2 GPS, GNSS, SBAS, etc.). Therefore, Raven Industries cannot guarantee the accuracy, integrity, continuity, or availability of these services and cannot guarantee the ability to use Raven systems, or products used as components of systems, which rely upon the reception of these signals or availability of these services.
  • Page 3 The instructions in this manual are designed to assist you in the proper installation of the AccuBoom system. Refer to your console-specific Installation and Operation manual for instructions on setting up the software and using the AccuBoom system.
  • Page 4 Notes: Manual No. 016-0171-084...

  • Page 5: Installation

    CHAPTER INSTALLATION Complete the following steps to properly install the AccuBoom on a CaseIH SPX 3320/3330/4420 Series Sprayer or a CaseIH FLX 20 Series Liquid Floater. Mount the CAN AccuBoom Node Behind the Operator Cab 1. Find the Case boom cable connector (12-pin Deutsch) located directly behind the cab.
  • Page 6 3. Mount the CAN AccuBoom node (P/N 063-0172-316) on the mounting studs (if supplied). Figure 2: CAN AccuBoom Node Installed (Model Year 2007 & Older) AccuBoom Node Connect the AccuBoom Cable to the AccuBoom Node 1. Connect the two Cinch rectangular connectors on the AccuBoom cable (P/N 115-0171-688) to the CAN AccuBoom Node (P/N 063-0172-316).
  • Page 7 1. Locate the sprayer CAN connector located close to the spray boom connector. 2. Remove the CAN terminator from the sprayer CAN connector. 3. Connect the AccuBoom cable (P/N 115-0171-688) to the CAN connection. 4. Connect the previously removed terminator into the other CAN connector on the AccuBoom cable (P/N 115-0171-688).
  • Page 8 Connect Power and Ground 1. Connect the power wire from the AccuBoom cable (P/N 115-0171-688) to a source of battery power. 2. Connect the ground wire from the AccuBoom cable (P/N 115-0171- 688) to battery ground. 3. Model Year 2008 & Newer Only – Connect the logic power 2-pin Deutsch connector to the machine’s 2-pin Deutsch connector labeled...

  • Page 9: System Troubleshooting

    SYSTEM TROUBLESHOOTING The CAN AccuBoom node (P/N 063-0172-316) has additional features to allow the user to diagnose the AccuBoom system. The CAN AccuBoom node has a plastic window in the case that allows the user to view green diagnostic lights. The following picture shows the positioning and function of each of the LED lights.

  • Page 10: Limited Warranty

    Bring the defective part and proof of purchase to your Raven dealer. If the dealer approves the warranty claim, the dealer will process the claim and send it to Raven Industries for final approval. The freight cost to Raven Industries will be the customer’s responsibility. The Return...
  • Page 11 How Can I Get Service? Bring the defective part and proof of purchase to your Raven dealer. If the dealer approves the warranty claim, the dealer will process the claim and send it to Raven Industries for final approval.