Flail Knives Applicable In Mowers Mido, Grino, Vino, Mamut, Rio - SaMASZ MIDO 140 Operator's Manual

Tab. 4. Recommended telescoping articulating shaft. Manufactured by Bondioli & Pavesi
Mower
140/160/180/
MIDO
200/220
160
GRINO
180/200/220
VINO 180
MAMUT 250/280/300
RIO 250/280
PTO shafts of other brands with equivalent technical parameters may be used on the SaMASZ
permission.
IMPORTANT:
Make sure to follow the PTO shaft lubrication frequency. Lubrication points
marked in Fig. 3, Fig. 4 and Fig. 5 should be lubricated every 50 hours. Always
lubricate the PTO shaft before and after a period of longer idleness.
Fig. 3. PTO shaft lubrication points:
7G7N066CE007007AX, 7G7N086CE007007TA,
7G7N066CE0071R0X

3.3.1. Flail knives applicable in mowers MIDO, GRINO, VINO, MAMUT, RIO

In flail mowers can be used different types of flail knives (Tab. 5) depending on the purpose
and working conditions.
If found, replace any damaged or worn knives. In case of replacing cutting knives, they
should have the same weight. Admissible difference in weight should not be more than 3 g. If a
single knife requires to be replaced, the opposite one should also be replaced in order to prevent
improper balance.
Instruction manual
Power Length Torque
ft in /
HP Nm
mm
2' 2"-2' 10"
64 830
660-885
2' 10"-3' 11"
35 460
860-1200
2' 10"-3' 11"
64 830
860-1185
2' 2"-2' 10"
64 830
660-885
3' 4"-4' 7"
83 1080
1010-1408
Fig. 5. PTO shaft lubrication points:
7G8N101CE007007TA
Rear - front and rear flail mowers
MIDO, GRINO, VINO, MAMUT, RIO
Symbol
7G7N066CE007007AX
7G4N086CE007007HA
7G7N086CE007007TA
7G7N066CE0071R0X
7G8N101CE007007TA
Fig. 4. PTO shaft lubrication points:
7G4N086CE007007HA
- -
6
Shaft ends
Tractor Mower
1 3/8" z=6 1 3/8" z=6
collar cover full cover