Determining Installed Options - Keysight X Series Manual

Products Covered by this Document

Determining Installed Options

Determining Installed Options
Use the following procedure to determine whether your instrument has Option
PC6 installed.
1. Using the instrument front panel and softkey menus, press System > Show
2. The "Show System" display appears. Look for the start of the "Option"
Figure 2-1 Show System Display: Option Listing
3. Under the "Option" heading, look for the entry "N9038A-PC6". If this entry
4. To dismiss the "Show System" display, press any other front-panel or
Security Features & Document of Volatility
> System.
listing, a few lines below the top of the table, as shown in
below.
is present, then your instrument has Option PC6. If there is no such entry,
your instrument lacks Option PC6.
menu key.
Figure 2-1
9