Connecting a Fast Ethernet Transceiver
893-00965-A
To connect the Model 514/515 100 Mb/s Ethernet Transceiver to the
BayStack 281xx switch, follow these steps:
1.
Place the transceiver on a table, allowing 2 inches on the top and the
sides for proper ventilation.
2.
Insert the female end of the transceiver cable into the male expansion
port on the front of the transceiver, as shown in
Tighten the retaining screws to secure the connection.
Figure 3-17. Connecting the expansion cable to the transceiver
3.
Insert the male end of the transceiver cable into the female expansion
port on the BayStack 281xx switch, as shown in
Tighten the retaining screws to secure the connection.
Attaching Devices to the Baystack 281xx Switch
M o d e
l 5 1 4
E xp a
n si o n
P o rt
T X
R X
T X
L in k
F D p lx
R X
P a rt
Figure
3-17.
C o l
P o w
e r
4747
Figure
3-18.
3-17