Table of Contents
Advertisement
Configuring the BayStack 281xx Switch
4-12
2.
In the Configuration Parameters menu, choose Switch Parameters.
The Switch Parameters menu is displayed, as shown in
System Up Time: 1 D-12H-22M-11S
MAC Address: 000081000201
Switch Software Version: 1.4.2
Modify IP Address [134.177.202.133]
Modify Default Gateway Addr [123.123.11.1]
Subnet Mask [255.255.255.0]
Modify Switch Priority [8000]
Modify Switch Port Type
Modify Switch Port Speed and Duplex Mode
Modify Switch Port Flow Control Mode
Modify Switch Expansion Port Transceiver Speed and Duplex Mode
Use cursor keys to choose item. Press <RETURN> to confirm choice.
<CTRL><P>:Main Menu
Figure 4-6.
Switch Parameters menu
3.
Choose Modify IP Address.
The current parameter information is displayed and the system prompts
you to enter a new parameter.
4.
Enter the IP address for the BayStack 281xx switch, then enter Y to
verify the new address.
The new IP address is not used until the BayStack 281xx switch is reset.
5.
Repeat steps 3 and 4, selecting the appropriate options, to modify the
default gateway and subnet mask for the BayStack 281xx switch.
The new default gateway and subnet mask information is not used until
the BayStack 281xx switch is reset.
IP Address: 134.177.202.133 [M]
Default Gateway: 134.177.202.129
Subnet Mask: 255.255.255.0
Switch Parameters
Change the Switch's IP Address.
<CTRL><U>:Previous Menu
Figure
4-6.
<CTRL><L>:Refresh Screen
893-00965-A
Advertisement
Table of Contents
