Table of Contents
Advertisement
893-00965-A
6.
Align the mounting holes in the brackets with the holes in the rack,
as shown in
Figure
Figure 3-4.
Installing the BayStack 281xx switch into a rack
7.
Insert two #10-32 x 3/4 inch screws with nylon washers through each
bracket and into the rack.
Use a #2 Phillips screwdriver to tighten the screws and secure the
BayStack 281xx switch to the rack.
NOTE: You can install the optional cable guide using the two
#10-32 x 3/4-inch screws, where you ordinarily insert the mounting
screws. See your Bay Networks representative for information about
ordering the optional cable guide.
3-4.
Installation Procedures
4804
3-5
Advertisement
Table of Contents
