Table of Contents
Advertisement
Configuring the BayStack 281xx Switch
Modifying Switch Port Flow Control
4-20
NOTE: Flow control is used on 100 Mb/s ports operating in full-duplex mode
and on cascade ports operating at 200 Mb/s. The disable feature is used only
for 100 Mb/s operation.
To modify the switch port flow control, follow these steps:
1.
Choose Configuration Parameters from the Main Menu.
The Configuration Parameters menu is displayed.
2.
Choose Switch Parameters from the Configuration Parameters menu.
The Switch Parameters menu is displayed.
3.
Choose Modify Switch Port Flow Control Mode from the Switch
Parameters menu.
A Switch Port Flow Control menu similar to that shown in
displayed.
Figure 4-10
is
893-00965-A
Advertisement
Table of Contents
