After Installing the Hardware
893-00965-A
2.
Turn off the AC power to the BayStack 281xx switch by pressing the
toggle switch on the back panel of the switch. (See
BayStack 28104/ADV
switch
To AC
power
RPSU
To AC
power
Figure 3-14. Turning off the AC power to the BayStack 281xx switch
The BayStack 281xx switch is now operational and can be attached to other
network devices. However, you must configure a few basic system parameters
to enable the BayStack 281xx switch to boot on to the network and
communicate with the Optivity network management station. For instructions
on entering system parameters, see "Minimum System Parameters" in
Chapter 4, "Configuring the BayStack 281xx Switch."
After Installing the Hardware
Figure
Power
switch
6443
3-14.)
3-13