Table of Contents
Advertisement
Configuring the BayStack 281xx Switch
One-Way Link Detection Message
Menu Maps
4-36
All BayStack 281xx switches can detect a one-way link transmission, where a
link can either receive data from or transmit data to another switch, but not
both. When a one-way link is detected, the problem link is identified in a
message on the front panel display. The system displays a console message
similar to "PORT x: 1-WAY LINK" where x identifies the port number of the
failed link.
Figures 4-17 and 4-18 show the menu options of the Boot Mode Configuration
menu and the Switch Parameters menu, respectively. These maps will help you
navigate the single-line display of the front panel.
Boot Mode Configuration
Modify Boot Mode
Image Load Mode
Boot Router IP
TFTP IP Address
TFTP Retry Count
Image File Name
Exit Boot Menu
Figure 4-17. Boot Mode Configuration menu map
4992
893-00965-A
Advertisement
Table of Contents
