Table of Contents
Advertisement
Configuring the BayStack 281xx Switch
Displaying System Information
4-8
Choose System Information from the main menu to display the current
information, as shown in
System Up Time: 1 D-12H-22M-11S
MAC Address: 000081000201
Switch Software Version: 1.4.2
Switch Software Image Version [Img 1:1.4.0/Img 2:1.4.0]
Switch Revisions [HW/CLK/FW] [Rev. G/25Mhz 1.0.A]
Switch Mode [basic]
Memory (EPROM/FLASH/NVRAM/DRAM) [256K/2048K/64K/2048K]
Master Switch Priority/MAC Addr [8000/00008128afao]
Master Switch IP Addr [134.177.202.133]
100 Mb/s Full Duplex (Port#) [1 2 3 4 5 6]
100 Mb/s Half Duplex (Port#) [7 8 9 10 11 12 13 14]
10 Mb/s Half Duplex (Port#) [15 16]
Trunk Ports [1 2 3 4 5]
Expansion Port #1/#2 [feeder (No Connection)/feeder (No Connection)]
<CTRL><P>:Main Menu
Figure 4-3.
System Information screen
The System Information screen only displays information: you must use the
Configuration Parameters menu to modify the BayStack 281xx switch
parameters.
Table 4-4
NOTE: The displayed information is static. To update the information,
press [Ctrl]+L.
Figure
4-3.
System Information
The Switch image software version.
<CTRL><U>:Previous Menu
describes the fields on the System Information screen.
IP Address: 134.177.202.133 [M]
Default Gateway: 134.177.202.129
Subnet Mask: 255.255.255.0
<CTRL><L>:Refresh Screen
893-00965-A
Advertisement
Table of Contents
