Usb-Hid And Usb-Vcp Interface Specifications; Settings; Interface Circuit; Dos/V Wedge Interface Specification - Opticon C 37 Specification Manual

8.2. USB-HID and USB-VCP Interface Specifications

Settings

8.2.1.
Reading the menu barcodes in section 10.1 can set the USB interface default.
The interface is full-speed USB (12 Mbps).
Note: You must install the USB-VCP driver on the host.

Interface Circuit

8.2.2.
Do not use the keyboard while the scanner is transmitting the data to the host.
Doing so may cause failure in data transactions.

8.3. DOS/V Wedge Interface Specification

Reading the menu barcodes in section 10.1 can set the DOS/V Wedge interface default.
For either interface (USB or HID/Wedge)—Set the language for the scanner and PC
keyboard to the same language before use; otherwise, the output may not be correct.

Figure 15: Interface circuit

21
Opticon
C37
Specifications Manual