Light Installation - Landoll 6230 Series Operator's Manual

MAIN WARNING
LIGHT HARNESS
WING STABILIZER
U-BOLT
LH BRACKET
WELDMENT
YELLOW
REFLECTOR
AMBER
SINGLE
LAMP
1/4-20 X 1-1/4 HEX
HEAD CAP SCREW
RED REFLECTOR
ORANGE STRIPE
5/8-11 FLANGE HEAD
SERRATED NUT
elect assy

3-12 LIGHT INSTALLATION

3-12.1 Attach lights and mounting brackets to
the center frames using u-bolts, 1/2-13 x
7-1/2 hex head cap screws, flange head ser-
rated nuts, and hex lock nuts (See Figure
3-22).
3-12.2 Connect light harness to lights.
1/4-20 HEX
LOCK NUT
1/2-13 HEX
LOCK NUT
1/2-13 X 7-1/2
HEX HEAD CAP
SCREW
1/2-13 HEX
LOCK NUT
WARNING
LIGHT BAR
TAIL LIGHT
SUPPORT
BRACKET
Figure 3-22 Light and SMV Bracket Installation
RH BRACKET WELDMENT
REAR WARNING
LIGHT
HARNESS
SMV
EMBLEM
1/4-20 X 3/4
HEX HEAD CAP
SCREW
1/2-13 X 5-1/2 HEX
HEAD CAP SCREW
SMV MOUNTING
BRACKET
3-12.3 Attach SMV emblem and mounting
bracket to rear center frame bar using 1/2-13
x 5-1/2 hex head cap screws, 1/4-20 x 3/4
hex head cap screws, and hex lock nuts.
The SMV sign should be centered on the
back bar of the frame.
ENHANCED
LIGHTING
MODULE
#8-32 X 1/2
PAN HEAD
SLOTTED
SCREW
3-33