Leveling (Front-To-Rear) - Landoll 6230 Series Operator's Manual

4-9 LEVELING (FRONT-TO-REAR)

4-9.1 The leveling feature on the disc is used
to keep the disc level when raising the unit
from a working position to a transport posi-
tion. The leveling feature is also used to level
the unit from front-to-rear to perform a level
discing operation in the field.
4-9.2 The unit should be level from front to
rear and the soil behind the disc should be
level without furrows or ridges. If there is a
presence of a center ridge from the rear
gangs, the rear gangs are too deep. If there
is a furrow left from the rear gangs the front
gangs are too deep.
6230leveler-manual
Figure 4-10 Manual Leveler Adjustment
4-10
LEVELER HANDLE
4-9.3 On machines with manual leveler ad-
justment, turn the leveler handle in or out to
adjust the front-to-rear level (See Figure
4-10). By turning the leveler handle in (clock-
wise) will lower the rear gangs in deeper. By
turning the leveler screw out (counter-clock-
wise) will raise the rear gangs.
4-9.4 Implements with the optional hydraulic
leveler, can make adjustments on-the-go
from the tractor. A reference gauge is pro-
vided on the implement for a guide.
IMPORTANT
IMPROPERLY SET GAUGE WHEELS CAN
PREVENT THE LEVELER FROM FUNCTION-
ING PROPERLY. LARGE ADJUSTMENTS, EI-
THER MANUALLY OR HYDRAULICALLY WILL
REQUIRE ADJUSTMENT
WHEELS.
OF GAUGE