Wing Frames - Landoll 6230 Series Operator's Manual

3-10 WING FRAMES

3-10.1 Place the wing frames on top of the
wing gang assemblies and attach using
3/4-10 x 2 hex head cap screws and hex
lock nuts (See Figure 3-9).
3-10.2 Assemble the tire and wheel assem-
blies to the wing frames.
3-10.3 Attach the front gauge wheel assem-
blies to the wing frames using 1-8 x 6 hex
head cap screws, gauge wheel spacers, and
hex lock nuts. Securely tighten the mounting
screws to eliminate any slack and unneces-
sary wear.
3-10.4 Mount the wing stabilizer brackets to
the wing frames using u-bolts and hex lock
nuts. See Figures 2-1 - 2-4 for placement
dimensions.
Note: On 21'-29' models the wing stabilizers
mount to the sides of the wing frame. On
30'-36' models the wing stabilizers mount to
the tops of the wing frames.
3-10.5 Install a 1/4 x 3 roll pin in one end of
each wing lock pin. Insert the pin in the
round hole of the front wing stabilizers and
secure with a 3/16 hair pin.
3-19