Landoll 6230 Series Operator's Manual page 58

4-5.5 To fold/unfold the disc, find a level area
large enough to accommodate the disc when
it is fully unfolded. The tractor should be
stopped and not moving with the unit fully
raised. Remove the transport lock pins from
the mounts and install them in the storage lo-
cations (See Figures 4-5 and 4-6).
IMPORTANT
FAILURE TO REMOVE THE LOCK PINS
WHEN UNFOLDING WILL RESULT IN SERI-
OUS DAMAGE TO THE IMPLEMENT. BE
SURE OTHER PEOPLE AND PETS ARE A
SAFE DISTANCE AWAY.
4-5.6 Slowly engage the tractor lever and
fold/unfold the wing frames. When the wings
are unfolded, continue holding the tractor le-
ver to fully extend all fold cylinders. This will
allow the wings to fully flex in the field.
4-5.7 When the unit is fully folded, remove the
transport lock pins from the storage location
and install in the mounts provided on each
side of the machine.
4-6
3/16 HAIR PIN
WING STABILIZER
BRACKET
1/4 X 3 ROLL PIN
WING LOCK PIN
6230foldlock1
Figure 4-5 Installed Position of Transport Locks
3/16 HAIR PIN
WING STABILIZER
BRACKET
1/4 X 3 ROLL PIN
WING LOCK PIN
6230foldlock2
Figure 4-6 Stored Position of Transport Locks