Electronic Depth Stop (Optional) - Landoll 6230 Series Operator's Manual

3-6 ELECTRONIC DEPTH STOP (OPTIONAL)

3-6.1 Attach the
mounting bracket to the middle cross bar of
the center frame using a 5/8 x 4 x 6-1/2
u-bolt and hex lock nuts (See Figure 3-6).
See Figures 2-1 - 2-4 for proper placement.
The depth control lever should line-up with
the depth stop mounting plate on the center
lift.
electronic depth control 3-6.2 Adjust the control rod linkage to 5-1/2"
length and connect the depth control lever to
the depth stop mounting plate.
3-6.3 Route the electrical cable from the front
hitch, through the hose loops and connect to
the depth control switch.
3-6.4 Fully retract (turn clockwise) the hydrau-
lic depth stop, so that it does not interfere
with the electronic depth stop operation.
3-6.5 Read and follow tractor operating in-
structions for setting and adjusting depth of
the electronic depth control.
3-13