General Safety Instructions - Craftex CX Series Manual

Extreme caution should be used when operating all power tools. Know your power tool, be familiar with
its operation, read through the owner's manual and practice safe usage procedures at all times
ALWAYS read and understand the
user manual before operating the
machine.
CONNECT your machine ONLY to the
matched and specific power source.
ALWAYS wear
respirators, hearing protection and
safety shoes, when operating your
machine.
DO NOT wear loose clothing or
jewelry when operating your machine.
A SAFE
important. Keep the area free of dust,
dirt and other debris in the immediate
vicinity of your machine.
BE ALERT! DO NOT use prescription
or other drugs that may affect your
ability or judgment to safely use your
machine.
DISCONNECT the power source when
changing drill bits, hollow chisels,
The safety instructions given above cannot be complete because the environment in
every shop is different. Always consider safety first as it applies to your individual
working conditions.

GENERAL SAFETY INSTRUCTIONS

safety glasses
ENVIRONMENT
WARNING!
router bits, shaper heads, blades, knives
or making other adjustments or repairs.
NEVER leave a tool unattended
while it is in operation.
NEVER reach over the table when
the tool is in operation.
ALWAYS keep blades, knives and
bits sharpened and properly aligned.
ALL
performed with the guards in place to
is ensure safety.
ALWAYS
feather boards to safely feed your work
through the machine.
ALWAYS make sure that any tools
used for adjustments are removed
before operating the machine.
ALWAYS
safely away while the machine is in
3
OPERATIONS MUST
use push sticks
keep the bystanders
BE
and