Table of Contents
Advertisement
GENERAL SAFETY INSTRUCTIONS
Extreme caution should be used when operating all pneumatic tools. Know your tool,
be familiar with its operation, read through the user manual and practice safe usage
procedures at all times.
Keep all guards and safety devices in
place and in working order.
Always make sure to remove all the
keys and wrenches before operation.
Always keep your work area clean and
well lighted.
Do not use the pneumatic tools in
damp or wet locations, or where
flammable or noxious fumes may
exist.
Always keep bystanders away or at a
safe distance from your work area.
Disconnect the power source when
changing drill bits, hollow chisels,
router bits, shaper heads, blades,
knives or making other adjustments or
repairs.
Never leave a tool unattended while it
is in operation.
Do not force the tool. It will do a better
and safer job at the rate for which it is
designed.
FOR PNEUMATIC TOOLS
Always use the right tool. Do not attach
any part to the tool for which it is not
designed.
Always check the hose for any damage
before using the pneumatic tool.
Disconnect the tool before servicing,
changing accessories, or moving to
another location.
Always check the tool for damaged or
broken parts, loosen screws or bolts or
any other unsafe condition that may
affect the tool operation. Repair the
damaged parts before operation.
Do not overreach. Always keep proper
footing and balance.
Always use safety glasses and a dust
mask while operation.
Always keep your tool lubricated and
clean for best and safest performance.
Be alert!
Do not use prescription or
other drugs that may affect your ability
or judgment to safely use your tool.
3
Advertisement
Table of Contents
